Application Of Pseudo-boehmite in Petrochemical Industry

Jul 22, 2022

At present, the main use of pseudo-boehmite is as a raw material for γ-alumina and a binder for difficult-to-form catalysts or catalyst carriers. Widely used as catalyst and catalyst carrier in the field

One of the important uses of pseudo-boehmite is the raw material of gamma alumina. γ-type alumina inherits the characteristics of large specific surface area, high activity and strong adsorption of raw materials, and becomes the raw material for synthesizing high-temperature structural ceramics such as aluminum nitride ceramics. In addition, nano-γ-Al2O3 is especially suitable for chemical mechanical polishing (CMP), and the CMP slurry prepared from nano-γ-Al2O3 as abrasive particles can be used for interlayer tungsten, aluminum, copper and other metals in the production process of integrated circuits as semiconductor wiring materials And the planarization of thin film materials and the polishing of advanced optical glass, quartz crystal and various gemstones.

2. Used as hydrogenation catalyst

In order to meet the requirements of efficient utilization of petroleum resources and clean oil products, hydrogenation technology has been widely used, and hydrogenation catalyst is the core of hydrogenation technology. The stone is roasted and dehydrated, and has a specific surface area, adjustable pore volume and pore distribution, and acid centers with different properties on the surface. It has the characteristics of good mechanical strength and thermal stability, and low price.

3. Used as adhesive

The use of pseudo-boehmite as a binder is not only conducive to the formation of the carrier, but also affects the catalytic performance of the obtained catalyst. The researchers added pseudo-boehmite as a It was found that not only the mechanical strength of the catalyst was significantly improved, but also the selectivity of the catalyst denitration activator was improved.

4. Preparation of γ-Al2O3 coating

Coating a high-surface active coating on the carrier is a common method to increase the specific surface area of the carrier. γ-alumina is the most commonly used coating material at present. The commonly used precursor for preparing γ-alumina coating is AlOOH sol. This alumina sol uses pseudoboehmite as raw material and is prepared by the method of acid peptization. The process is simple and easy to control, and can be used for industrial production.