Calcined Alumina Fine Powder
Aug 08, 2022
The effect of the particle size of industrial alumina powder on the properties of activated alumina micropowder (α-Al_2O_3 micropowder) was studied. The industrial alumina powder (median diameter of 80 μm) was used as raw material to grind it, and the median diameters of 50 and 30 were obtained. , 10,5μm fine powder, the industrial alumina powder before and after grinding was calcined at 1 320 ℃ for 5 h to obtain activated alumina micropowder. The effect of different industrial alumina powder particle sizes on the microstructure and properties of activated alumina micropowder was studied. The results show that the initial particle size of industrial alumina powder has a great influence on the grain morphology of activated alumina micropowder. When the diameter is less than 10 μm, α-Al_2O_3 grains of 0.3~1.0 μm are formed after calcination, which are round, spherical and well dispersed. With the decrease of the initial particle size of industrial alumina powder, the phase inversion rate of α-Al_2O_3 increases. , and the true density tends to increase gradually. With the decrease of the initial particle size of the industrial alumina powder, the grinding of the α-Al_2O_3 powder after burning becomes easier, its dispersibility becomes better, and it has better fluidity.



