Catalyst Carrier Alumina
Jul 14, 2022
Alumina (VK-L20Y, L50Y) has the advantages of porosity, large specific surface area and high dispersibility, and is used as catalyst carrier in many fields.
Alumina carrier refers to white powder or formed alumina solid, which is the most widely used catalyst carrier, accounting for about 70% of industrial supported catalysts, such as in hydrorefining, hydrocracking, catalytic reforming Production of aromatic hydrocarbons, catalytic combustion, hydrogen production from methane steam reforming, ethylene epoxidation and automobile exhaust gas control. Common shapes of catalyst supports include: column, ring, spherical, tablet, granule, extruded strip, and the like. Generally, it is divided into the following categories: high temperature alumina carrier; interactive carrier; synergistic or bifunctional carrier. The following are several application directions.
1. Application in vehicle exhaust catalyst carrier
The main pollutants emitted by automobile exhaust are: CO, NOx, CxHy and Pb, etc. After NOx and hydrocarbons are irradiated by strong ultraviolet rays, they will also produce new secondary pollution - photochemical smog, which is directly or indirectly caused by photochemical smog. Indirect economic losses are huge. An important way to avoid photochemical smog is to pre-treat vehicle exhaust. The best way at present is to install a catalytic device on the exhaust pipe of the automobile to convert unsaturated hydrocarbons and nitrogen oxides into saturated compounds, and alumina is an excellent carrier for the catalyst in this conversion process.
2. Application in oxalate synthesis catalyst
The key technology of CO gas-phase coupling synthesis of oxalate is the development of high-efficiency catalysts. Alumina is one of the most widely used catalyst support materials in this reaction. The preparation of a suitable alumina carrier is the core performance for the development of a catalyst for CO gas-phase coupling synthesis of dimethyl oxalate, and excellent alumina can improve the activity and selectivity of the catalyst.
3. Application in catalytic cracking (FCC) catalyst
Activated alumina is an important matrix material. Adding it to the cracking catalyst matrix as a solid acid can not only improve the matrix activity, but also make full use of the binding effect of kaolin and molecular sieves to prepare a matrix with good matrix activity and good anti-wear. sex catalyst.
The preparation process of the alumina carrier largely determines the distribution of its pore structure. There are two main methods for preparing alumina carrier: pseudo-boehmite dehydration method and sol-gel method.
1. Pseudo-boehmite dehydration method
The dehydration method of pseudo-boehmite is to calcine pseudo-boehmite at high temperature to form alumina after removing water. According to different raw materials, it can be divided into precipitation method, carbonization method and aluminum alcohol hydrolysis method.
(1) Precipitation method
Precipitation method is a common method for preparing pseudo-boehmite, which can be divided into alkali precipitation method and acid precipitation method according to different precipitants. The specific preparation process is as follows: using aluminum salt or aluminate as raw material, using alkali to precipitate monohydrate alumina from aluminum salt solution (alkali precipitation), or using acid to precipitate monohydrate alumina (acid precipitation) from aluminate solution Precipitation), the precipitate is washed, dried and calcined to obtain pseudo-boehmite.
(2) Carbonization method
The carbonization method is to prepare pseudo-boehmite by the reaction of CO2 and sodium metaaluminate. The reaction is as follows:
img1
Pseudoboehmite can be obtained by aging of hydrated alumina Al(OH)3
(3) Hydrolysis of aluminum alkoxide
Aluminum alkoxide hydrolysis is widely used to prepare high-purity pseudoboehmite. In this method, aluminum alkoxide is hydrolyzed to form monohydrate alumina. After aging, filtration and drying, pseudo-boehmite can be obtained. The product has high purity, good crystallinity, uniform particle size and concentrated pore size distribution. aggregated spherical particles. However, the process is complicated, and the organic solvent used has certain toxicity and is difficult to recover.
2. Sol-gel method
With the continuous deepening of the research on the material synthesis process, the preparation of sol-gel carriers has developed rapidly. The sol-gel method is to use metal organic compounds or inorganic salts as precursors, add pure water or organic solvents to prepare a solution, and form a sol after the reaction.
To sum up, the alumina preparation process is still improved on the traditional process (pseudo-boehmite dehydration method), and the carbonization method has become the main method for producing industrial alumina due to its economical and environmental protection. Alumina prepared by the sol-gel method has a more uniform pore size distribution, which is valued and is a potential method, but the industrial application can only be realized by improving the preparation process.
With the continuous expansion of the application of alumina carriers in the fields of chemical industry and environmental protection, the preparation process of alumina is updated, low-cost, green and environmentally friendly processes are developed, the pore size and pore size distribution of alumina are controlled, and the thermal stability of alumina is improved. The preparation of nano-alumina (VK-L20Y, L50Y) can make the alumina carrier better meet the actual production needs.



