Super Fine Aluminum Hydroxide For Filler
Jul 12, 2022
When wires and cables are used in construction projects, their flame retardancy is an important parameter for testing products. If the insulating material does not have flame retardancy, there may be some potential safety hazards in use. And aluminum hydroxide micropowder is a product with flame retardant function. What kind of application and influence does it have in wire and cable? Let's refer to the following:
Because micropowder has the three functions of flame retardant, smoke elimination and filling, there is no secondary pollution during combustion, good thermal stability, non-toxic, no corrosive gas, less smoke, and good flame retardant effect. And fillers are widely used in wire and cable.
The effect of mixing uniformity on the properties of aluminum hydroxide wire and cable material:
In order to meet the flame retardant requirements of halogen-free and low-smoke wire and cable standards, more than 50% of aluminum hydroxide should be added. The particle size of the two is quite different, and they are inorganic and organic respectively. Therefore, whether the uniformity of material mixing can be ensured during the mixing process will directly affect the mechanical and flame retardant properties of wire and cable particles.
With the increase of aluminum hydroxide content, the continuous increase of mixing torque makes it more difficult to mix uniformly, the elongation at break of wires and cables gradually decreases, and the melt flow rate decreases, but the oxygen index increases due to the increase of aluminum hydroxide content. For example, when it is difficult to mix due to short mixing time or high viscosity of raw materials during the mixing process of raw materials, the change of each component in the wire and cable pellets will lead to unqualified product mechanics or flame retardant properties, resulting in unqualified products. Therefore, whether the uniformity of material mixing can be ensured during the mixing process will affect the performance of wire and cable pellets.
The influence of mixing time on the mechanical properties of wire and cable materials:
The effect of the mutual fusion of aluminum hydroxide and organic materials during the mixing process affects its mechanical properties. In order to determine the influence of the mixing time on the performance of the wire and cable masterbatch, it is concluded through experiments that when the mixing time is less than 120 seconds, the performance of the wire and cable pellets. The tensile strength and elongation at break are obviously low, and are basically normal after 180 seconds. Therefore, the internal mixing of the materials must be completed when the torque reaches a large value, that is, the materials are mixed evenly and the plasticization process is completed, which can ensure the mutual fusion of the materials and the stability of the product performance.
The chemical composition, particle size and crystal shape of this product will also affect its mixing and plasticizing time with organic materials. Therefore, in order to obtain wire and cable materials with excellent performance, it is necessary to Equipment performance and production process to determine the best mixing time.
In addition to the effects of uniform mixing of various materials and mixing time, improving the heat resistance of aluminum hydroxide micropowder can keep the performance of the wire and cable stable at higher processing temperatures, and can be used at higher ambient temperatures, improving the safety of use. sex.





