The Main Indicators Of Pseudo-boehmite

Aug 24, 2022

Pseudo-boehmite has a unique structure and thus exhibits unique physicochemical properties, which are different from other alumina hydrates in the following aspects.

1. Specific surface area and pore volume

The structural water of the pseudo-boehmite layer can be as high as 30%, so many internal pores and internal surface areas will be formed during its dehydration process. The following table lists the variation of the specific surface area of pseudo-boehmite with different crystallinity. It can be seen that with the increase of crystallinity, the specific surface area of pseudo-boehmite is greatly reduced. Moreover, when the pseudo-boehmite is dried at 120 °C and 150 °C, the specific surface area is also significantly different, and the specific surface area decreases when dried at high temperature. Therefore, by adjusting the surface properties of pseudo-boehmite grains and improving dehydration conditions, the pore volume and pore structure of pseudo-boehmite can be greatly changed.

2. Thermal stability

Pseudo-boehmite has high thermal stability, and its DTA (differential thermal analysis) curve has an endothermic peak at 400-450 °C, while the DTA curve of general gibbsite has an endothermic peak around 200 °C , the specific surface area of the pseudo-boehmite after dehydration is further increased, which is about 100 mL/g larger than the specific surface area of the catalyst made of gibbsite.

3. Peptosis

Pseudo-boehmite is widely used in the catalyst industry, and more importantly, it has another characteristic - peptization. Pseudo-boehmite has good peptization, and the peptization rate of products by carbonization is generally greater than 95%, while the SB (pseudo-boehmite) powder produced by the alkoxide method has a peptization rate of up to 98%.

When a small amount of nitric acid is added to the pseudo-boehmite dispersion, the following reaction occurs:

The generated Al3+ is ionized in water and coordinated with OH- to form a gel core, the gel core selectively adsorbs positively charged H+, while negatively charged NO3- is freed around the gel core due to attraction and diffusion, thus forming double electrons The layer structure, only a small amount of HNO3, is enough to peptize all the gelatinous filter cakes and become a sol with good fluidity.