What Are The Production Methods Of Pseudo-boehmite?

Apr 27, 2022

Natural or produced alumina monohydrate and alumina trihydrate have the characteristics of small pore volume, small specific surface area, low activity, and can not be used as a dry agent, adsorbent, catalyst and catalyst carrier. Therefore, it is necessary to process alumina monohydrate or alumina trihydrate into pseudo-boehmite. The product has high specific surface area, large pore volume, large pore diameter, high activity and other characteristics, suitable for petrochemical, chemical fertilizer, tail gas and other fields as a dry agent, adsorbent, catalyst and catalyst carrier.

One is to prepare pseudo-boehmite by carbonization method. Carbonization process is based on sintering process to prepare alumina. NaAlO2 solution and CO2, the central products in the production process, were used as reaction materials. The process is simple, the lowest cost, basically no waste discharge, small environmental pollution. It's a competitive advantage, and it's a way out. The quality of the product prepared by carbonization method is related to the production conditions such as material concentration, gelation temperature, pH value, aging temperature and time, wet filter cake dry temperature and so on. The defect of carbonization method is that the product contains impurities, the purity is not high, and the consumption of sodium washing water is large. alpha


The second is alkali production of the product. In order to replace the catalyst of conventional fertilizer plant, the development and production of chemical fertilizer catalyst are dealt with. The technical specifications of alumina carrier are as follows: the apparent density is 0.5 ~ 0.65 kg/L, the mass fraction of alumina is 94% ~ 95.5%, the mass fraction of sodium oxide is 0.01% ~ 0.03%, the specific surface area is 175-250m2 /g, the pore volume is about 0.50ML/g, and the pore size is 3-6nm. The aperture of the product is 0.7-1mL /g, and the aperture is spread at 10-50nm. The most suitable aperture is 40nm. It is a quality product with a wide range of uses.


Three is the acid method to produce the product. The depositing agent ammonia (or sodium hydroxide, sodium carbonate, etc.) is added to aluminum trichloride (or aluminum sulfate) solution, and then the product is obtained through deposition, filtration, washing and drying. The effects of neutralization temperature, pH value, reaction concentration and aging conditions on pore structure were studied. The method has the advantages of large pore capacity, large specific surface area and high cost.


Fourth, the production of pseudo-boehmite by double aluminum method. The so-called "double aluminum process" is the preparation of aluminum sulfate and sodium metaluminate parallel reaction of the product.