Introduction Of Two Kinds Of Common Pseudo-boehmite Production Technology

Dec 09, 2022

The production process of pseudo-boehmite is mainly through neutralization or hydrolysis into gel, and then aging treatment, sometimes aging, crystallization, aging and other phenomena will occur. So what are the common pseudo-boehmite production processes? And Xiaobian together to understand it

1, acid-base neutralization method

The neutralization method uses different aluminum-containing raw materials and corresponding precipitants to undergo neutralization reaction under certain conditions to generate alumina products with amorphous basic phase, and then the products are obtained through multi-channel processing operations.

Carbonization is a kind of neutralization method, which is not only used in the decomposition process of alumina production by sintering method, but also can be used to prepare pseudoboehydrite under suitable decomposition process and equipment conditions. In fact, the carbonation method is also a neutralization method, the difference is that it is a gas liquid reaction process to form a gel. Sodium aluminate solution was used as raw material and precipitant.

Carbonization gelling adopts low temperature, high speed, low pH gelling process. Small changes in the initial temperature, concentration, ventilation rate, ph value of the solution and other control parameters will directly affect the quality of the gelling products, post-processing operations and products, especially the key technical indicators such as the purity of the crystalline phase formed, the gel dissolution index, and the gel dissolution rate. The products of rapid gelation are mostly amorphous, accompanied by a small amount of sodium bauxite compound salt, which requires subsequent treatment, such as aging process to obtain quasi-bauxite products that meet the requirements of use.

2, organic alcohol salt method

According to the characteristic that aluminum can produce organic matter, aluminum alkoxide was prepared under certain conditions, and then hydrolyzed to obtain pseudo-boehmite.

Compared with the products produced by other processes, the products prepared by alcohol-aluminum hydrolysis have the advantages of high chemical purity, less miscellaneous, good crystallinity and good gel solubility. However, the price is expensive and only suitable for the product. The pseudo-botraite produced by this method has a purity of up to 5N, high chemical purity, large pore volume, and large specific surface area.

The above is Zhongtianli Xiaobian to share all the relevant content with you. You are welcome to contact us if you have relevant needs. Zibo Yishengjia Aluminum Co., Ltd. is a manufacturer specializing in the development, production and sale of nanomaterials. We look forward to your consultation at any time.