What Are The Production Methods Of Pseudo Boehmite?

Mar 29, 2022

Natural or produced alumina monohydrate and alumina trihydrate have the characteristics of small pore volume, small specific surface area and low activity. They can not be used as boring agent, adsorbent, catalyst and catalyst carrier. Therefore, it is necessary to process alumina monohydrate or alumina trihydrate into pseudo boehmite. The product has the characteristics of high specific surface area, large pore volume, large pore size and high activity. It is suitable for petrochemical industry, chemical fertilizer, tail gas and other fields as boring agent, adsorbent, catalyst and catalyst carrier.


One is to prepare pseudo boehmite by carbonization. The product is prepared by carbonization method on the basis of alumina preparation process by sintering method. NaAlO2 solution and CO2, the central products in the production process, are used as reaction materials. The process is simple, the cost is the lowest, there is basically no waste discharge and little environmental pollution. This is not only a competitive advantage, but also a way out. The quality of the product prepared by carbonization method is related to the production conditions such as material concentration, gelation temperature, pH value, aging temperature and time, dry temperature of wet filter cake and so on. The defect of carbonization production is that the product contains impurities, the purity is not high, and the consumption of sodium washing water is large. alpha


The second is to produce the product by alkali method. In order to replace the catalyst of chemical fertilizer plant, the R & D and production of chemical fertilizer catalyst are treated. The technical indexes of alumina carrier are: the apparent density is 0.5 ~ 0.65 kg / L, the mass fraction of alumina is 94% ~ 95.5%, the mass fraction of sodium oxide is 0.01% ~ 0.03%, the specific surface area is 175-250m2 / g, the pore volume is about 0.50ml/g, and the pore diameter is 3-6nm. The pore size of the product is 0.7-1ml/g, the pore size is dispersed in 10-50nm, and the most suitable pore size is 40nm. It is a high-quality product with a wide range of uses.


Third, the product is produced by acid method. The deposition agent ammonia (or sodium hydroxide, sodium carbonate, etc.) is added to the aluminum trichloride (or aluminum sulfate) solution, and then the product is obtained through deposition, filtration, washing and drying. The effects of neutralization temperature, pH value, reactant concentration and aging conditions on pore structure were discussed. This method has the advantages of large pore volume, large specific surface area and high cost.

Fourth, the production of pseudo boehmite by double aluminum method. The so-called "double reaction" of aluminum sulfate is parallel to the preparation of aluminum sulfate.